Automotive Posts Relating to ‘transmission’

How to Change Transmission Fluid

Monday, October 3rd, 2011

Here we show you how to change your transmission fluid.

Drain as much fluid as you can before pan removal. Learn how to crack the seal on the transmission oil pan when changing transmission fluid in this free auto maintenance video from a car repair professional. Nathan McCullough graduated from Nashville Auto-Diesel College and received their Craftsmanship Award and Honor Seal

Rebuilding Dodge A670 Automatic Transmission

Tuesday, September 27th, 2011

The A670 automatic transmissions is from a front wheel drive 3 speed automatic vehicle. Common symptoms are early soft, late hard shifts or no shifts at all.

Dodge A413, A470, A670, 31TH Transmission Rebuild. If your vehicle feels like it wants to keep going when you come to a stop, and your engine dies when hot, check your lock-up solenoid on the valve body in the transmission pan. The majority of the time it sticks when the transmission becomes hot.

Honda Civic Transmission Output Shaft Seal Replacement

Tuesday, September 27th, 2011

This video shows how to replace a leaking transmission output shaft seal on a 1997 Honda Civic, but should also work for Civic manufactured during 1996-2000.

You will also learn how to replace a drive axle, because it is taken out when the seal is replaced. Remember you do not have to take the rubber boot off, it was easier for me to so I was able to get a good grip. Also, make sure when installing the seal it is flush with the transmission case, you do not want to force it and push it back too far or it will be ruined by other moving parts inside the transmission. I received estimates from 3 different transmission shops to do this transmission seal replacement ranging from $120-$170. The seal only cost $16, and it took my 1 hour to replace. Tools Needed: 17mm Socket 32mm Socket Seal Torque Wrench Screwdriver (flathead) Pliers Jack stand Car Used: 1997 Honda Civic EX Coupe 5 Speed Manual.

How a Automatic Transmission is Made

Wednesday, September 21st, 2011

The remanufacturing process of a BOSS Transmission starts with the proper identification of the transmission. The used transmission core is then disassembled, washed thoroughly using biodegradable cleaning solutions, in an industrial, high-temperature transmission parts washing machine. Each internal part is inspected thoroughly for OEM specifications. All parts not meeting OEM specifications are discarded and replaced using a variety of quality new OEM and aftermarket parts, such as Honda, GM, Chrysler, and Ford OEM and other parts providers.

We use aftermarket new parts, such as Borg Warner, Transtec, Sonnax, Raybestos, Precision, and Rostra, just to name a few. Each transmission unit is carefully re-assembled and updated using the latest technical service specifications, such as, valve body re-programming, super-ceded parts replacement, bushing updates, electronic updates, torque converter bearing and lining updates, all of which are required to meet BOSS Transmissions building standards. Each of our transmissions are built by a knowledgeable and experienced transmission technician from start to finish, ensuring a quality tested rebuild remanufactured transmission. It is then ready for you to replace that old and non-working transmission with a quality tested rebuild or remanufactured BOSS Transmission.

How to Replace Transmission Axle Shaft Seal GM 4T65E

Tuesday, September 20th, 2011

The 4T65-E is a series of automatic transmissions from General Motors. Designed for transverse engine configurations, the series includes 4 forward gears. The 4Txx family is an evolution of the original Turbo-Hydramatic 125 transverse automatic introduced in the late 1970s. The “-E” transmission is electronically controlled and features an automatic overdrive transaxle with an electronically controlled torque converter clutch.

Removing and installation for the GM 4T65E Automatic Transmission LEFT-SIDE output/axle shaft Seals. RIGHT-SIDE input/axle shaft seal is different in design and can be install and remove the same way.

4L60E Automatic Transmission Shift Kit

Saturday, September 17th, 2011

Before you rebuild your 4L60E Transmission you will need a rebuild kit. Most higher end rebuild kits will include a new shift kit as well. An automatic transmission shift kit is only needed if you want the gears to shift sooner, but it can also reduce transmission wear by reducing or eliminating shift overlap

GM 4L60E Transmission Rebuild Teardown Working thru the valve body webbing, Rick goes over a proper tear down of the valve body, including the forward accumulator and solenoids. This is key to preparing for the repair or adding a shift kit to your 4L60E Transmission.

4L60E Automatic Transmission Servo Removal

Saturday, September 17th, 2011

Removing the Servo on a 4L60E Automatic Transmission. Removing the 2 – 4 servo is not that hard on your GM 4L60E Transmission.

First remove the snap ring, then pull up on the 2-4 servo with pliers to expose the o-ring. Now you can cut the o-ring and pull it out with some pliers. Then you’ll carefully remove all of the internal parts.

Mercedes E270 CDI Automatic transmission Rebuild

Saturday, September 17th, 2011

Here is a Mercedes Benz E270 CDI that has a problem when the car is shifting into 2nd gear. Most likely the second gear clutch pack has an issue. Either one of the clutch discs in the pack or the pressure plates is blown. So I needed to get the transmission overhauled.

Disassembly and rebuild of Mercedes E270 CDI automatic transmission.

AOD Transmission Oil Pump and Piston Assembly

Tuesday, September 13th, 2011

The AOD (for automatic overdrive) is a four-speed automatic transmission with overdrive. Introduced in 1980, it was Ford’s first four-speed automatic overdrive transmission. The 4R70W stands for 4 gears, Rearwheeldrive, 70 stands for the 4th gear ratio, and Wide gear ratio. It has lower 1st and 2nd gear ratios for better take-off acceleration and improved gearset strength.

The AOD was used originally on ’80s and early-’90s Ford, Lincoln, and Mercury products and in the F-series pickups and E-series vans as well. Because the AOD is basically a retooled C-4, many classic car owners have discovered they can substitute this overdrive transmission into their ’60s and ’70s production vehicles relatively easily and reap the benefits of a lower final gear ratio and decreased wear and tear on their vintage small-block V-8 engine. Theres more parts to take off of this but I will do that when the rebuild kit gets here, just to make sure I get the right parts.

Rebuilding the 700R4 Automatic Transmission

Sunday, September 11th, 2011

The 700R4 transmission was produced until 1992 in trucks and 1993 in cars. As far as I’m concerned, this is one of the best automatic transmission ever. It is strong and can be updated for many uses, as in, for hot rods, extra heavy commercial work and when prepared properly for a particular application is versatile beyond imagination.

The 700R4 “Bad Boy” is generally used in vehicle applications where the vehicle will be used in beyond-stock 4×4, heavy duty or performance applications where overdrive capability is desired. Now lets learn wow to rebuild the GM 700R4 / 4L60 automatic transmission.